1. Login to RCP-NOC-DC-1
2. Launch Chrome
3. Click: Wyse Management console on the Bookmarks Bar
a. Creds can be found in Password State under: Website\Dell Wyse Management Suite
4. Login to the Wyse Management console using the Cred in Password State
5. Click on the devices tab
a.
6. Click on Status
a.
7. Select “Enrollment Validation Pending”
a.
8. You should all the Devices that have “Pending Enrollments”
9. Check the box next to the Device Name, then click “Validate Enrollment”
a.
10. This will send the Enrollment command to the device. This steps take a minute or two.
11. You should be able to check Registered devices, and find the Device by searching the serial number to confirm this has completed properly.
a. To confirm the device is registered, you should see a green Dot next to the Device Name, and under compliance
b.